Drypoint exploration

Drypoint is an intaglio printmaking process, which means the ink is printed from the depths of the plate - the areas cut away, rather than the surface. In that sense it's like etching - except that with drypoint you scratch directly into the plate, rather than using acid to bite the surface.

The lines created with drypoint are distinctive, because the ink is captured within the 'burr', the edge of the cut line. It is possible to use metal or perspex plates. In either instance the plats have a shorter life - because each printing serves to flatten the plate.

Enough of the background! Here are a couple of examples. To familiarise myself with my new Hawthorn etching press, I created a small drypoint image of Pittenweem on the Fife coast of Scotland. It's an atmospheric, beautiful fishing village - with cottages hiding from the sea down narrow alleys called 'wynds' which often connect to streets on other levels. My husbands family spent many holiday in the cottage on the right. It has been wonderful to revisit this beautiful area with him.

Test print - Pittenweem drypoint (perspex plate)

This image started as this little sketch, below:

Sometimes, I find I use drypoint to test a planned composition. This is a drypoint which I created as a little study for 'Above Ullswater' to see if I like the structure. I then went on to explore how to create this in a linocut. You can see more about this process in my blog on the topic here.

Initial drypoint test plate for 'Above Ullswater'

To learn more about my work, please check out my website www.carolynmurphy.co.uk where you'll find my gallery, online shop and links to my social media.

That 20:20 time of year!

After having had to take some time off from printmaking, I'm back and have just completed my 2015 edition for the 20:20 print exchange. This year I submitted prints with Prospect Studios, as I've done most of my recent work there. It's a hand-printed multi-plate woodcut, called 'The Low Road' based on a Scottish landscape:

I've chosen to adapt a 3 plate woodcut initially developed in Lucy Schofield's fantastic Japanese woodblock printmaking course, which I really enjoyed in September at Hot Bed Press in Salford. It was cut in the traditional Japanese fashion with a knife, called a 'hangito'. I've added some development phases below so that the transformation from the Japanese style is obvious.

My unfinished 3 block Moku hanga Japanese woodblock print was painstakingly cut in the correct fashion with the hangito knife held like a dagger to create a 'living line' (image size 14 x 10mm). The image was cut into 4mm Japanese ply, with kento registration marks, and inked up using water-based ink onto Japanese paper. It looked pretty good (though unfinished) at the end of the course on ozuwashi paper:

Course info on the link, in case you're interested:
http://www.hotbedpress.org/courses/japanese-water-based-woodblock-printing-mokuhanga/

I liked the image but wanted to add overlap colours (not a Japanese thing to do) to add interest. I also decided to add gradations and worked up a prototype to see what I could achieve with the same 3 woodblock plates. Once I was happy with the prototype (first image below) I finished cutting the final plate, removed kento marks and built up my 20:20 edition colour by colour. This is how the image built up - colours 1, 2, 3 and a border:

Below you can see the key plate, entirely cut with a knife and surrounded here by a mask to keep the 20:20 image clean. And finally all the 20:20 original woodcut prints, hand-printed at home, drying in my dining room 'studio'!